Gastronorm trolley for 14 × GN

RWG/AP 2/14 GN 75-L-U
Gastronorm trolley in low version for storing GN 1/1 containers and associated partition elements.
Key facts
  • With worktop

  • Lengthwise insertion

  • Pitch: 75 mm

  • U-shaped rails

Prices visible after registration. Register now
Trolley with two compartments in robust, self-supporting and hygienic design, made of... more

Product information

Trolley with two compartments in robust, self-supporting and hygienic design, made of high-quality 1.0 × 1.0'' (25 × 25 mm) stainless steel. 14 pairs of welded U-shaped shelf rails at distances of 3.0'' (75 mm), with push-through and tilt protections on both sides as per DIN EN 18867-2. Cover plate made of 0.04'' (1.0 mm) thick sheet steel, folded by 1.6'' (40 mm) on all sides, lined with sound insulation on the underside, suitable for use as worktop. 4 polyethylene disc bumpers serve as bumpers and protect trolley on all sides as well as building-side walls from being damaged. Trolley runs on 4 swivel casters of which 2 with total locks, ø 4.9'' (125 mm), with pin fastening.

The Hupfer gastronorm trolley RWG / AP 2 / 14 GN 75-L-U has the lowest empty weight in comparison to other products and therefore provides outstanding handling properties, while its rail spacing of 75 mm gives it a 50 % greater capacity (when GN containers without lids with a depth of 150 mm are placed in it).

Technical information

Maximum dimension: 530 × 325 mm
Capacity: 14 × GN 1/1
Modular dimension: 75 mm with 14 pairs of insert rails (U)
Insertion type: Lengthwise
Rectangular tube frame: 25 × 25 mm
Worktop: 1.0 mm
Bevelled worktop edges: 40 mm
Payload: 85 kg/187 lbs
Castors: 4 swivel castors, 2 with lock, ⌀ 125
Main construction: Open, two-part
Design: Low, with worktop
Weight: 21.66 kg
Width: 619 mm
Depth: 813 mm
Height: 856 mm