Transport trolley for eutectic plates

KPTW 1/46 GN 60-B
Retractable transport trolley for storing and transporting GN 1/1 cold storage plates.
Key facts
  • Drive-in transport trolley

  • For 46xGN 1/1, pitch: 60 mm

  • Load bearing capacity: 207 kg

  • Stainless steel

Prices visible after registration. Register now
Open trolley with one compartment in robust, self-supporting and hygienic design, made of... more

Product information

Open trolley with one compartment in robust, self-supporting and hygienic design, made of high-quality stainless steel, with vertical struts made of stainless steel wire at the long sides. Fixed supports made of stainless steel round bars, for crosswise insertion of plates, with push-through protections on both face sides. Two continuous steel sheets running vertically, welded centrally at the long sides, to reinforce the support brackets and as additional central push-through protection and centring aid for the cooling plates. Four massive polymer corner bumpers serve as bumpers and protect the equipment on all sides as well as building-side walls from being damaged. Trolley runs on 2 swivel casters with total locks, 2 fixed casters. Stainless steel caster housing with stainless steel ball bearings, ø 4.9'' (125 mm), according to DIN 18867 Part 8, fastened by means of screw-on plates and several screws, specifically offset to the interior for insertion into fridges.

The Hupfer eutectic plate transport trolley KPTW 1/46 GN 60-B has outstanding handling properties due to its very low empty weight in comparison to other products, while the use of bow-shaped shelf rails and the optional transport guard provides optimised protection for the eutectic plates.

Technical information

Capacity: 46 × GN 1/1
Modular dimension: 60 mm
Insertion type: Crosswise insertion
Payload: 200 kg
Weight: 34.585 kg
Width: 745 mm
Depth: 665 mm
Height: 1660 mm